Microfilm Products Company

Home

Catalog

molex® *Microfiche Title Strip Labels*
LABELS ON SHEETS
Label #
410
	1/2" x 5 3/4" (12.7mm x 146mm)

420
	1/4" x 5 3/4" (6.35mm x 146mm)
SPECIFICATIONS: Labels are made of 2-mil plastic, self-adhesive, with translucent, matte-finished surface for receiving typed or printed text. Labels abut one another on 5.75” x 8” (146mm x 203mm) sheets. Light blue (non-reproducing) lines on either end of the strip guide the typing area. USES: Place on any microfiche master or film jacket with appropriate size title area. Can also be used for labeling rollfilm file duplicates on a clear, blank area of the roll.
LABELS ON CONTINUOUS FORMS WITH CARRIER PIN HOLES
435
	7/16" x 5 1/2" (11mm x 139.7mm)

436
	1/4" x 5" (6.35mm x 127mm)

437
	3/16" x 5 3/4" (4.8mm x 146mm)
SPECIFICATIONS: The 430 series labels are on continuous form, pin-feed, fan-folded sheets for computer printers, word processors, and typewriters. Labels are made of 2-mil plastic, self-adhesive, with translucent, matte-finished surface. Each label is die-cut on all sides. USES: For all fiche masters and film jackets with appropriate title area space. Can be used on rollfilm clear, blank areas. NOTE: The 436 label is designed specifically for jackets and allows for the jacket pin-holes. Label 437 is another choice. It is narrower (and longer) than the 436 and can be placed above the jacket pin-holes, so cut- outs are not n All the Molex plastic labels will duplicate their data on diazo, silver and vesicular films
430-P
	7/16" x 5" (11mm x 127mm)

437-P
	3/16" x 5 3/4" (4.8mm x 148mm)